Air Treatment & Conditioning

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Air Treatment & Conditioning

Share us

High temperature Type Electromagnetic Flow Meter

MTF

Send Inquiry

Description

?
? ? ? ? ? ? ?High Temperature Electromagnetic Flow Meter?


?

Heat type introduction

?

Heat type magnetic flow meter is, integrated with flow velocity, heat,

?

accumulation and display, used to measure the water flow rate and

?

temperature difference between water supply and drainage by magnetic

?

sensor and temperature sensor so that to measure and display the water

?

absorbed or released heat while flowing through the power-consumption

?

equipments.

?

?

?

?

?

Maintenance and repair

?

a) Sensor installation site should be consistent with the section four

requirements, Please keep the housing clean and tidy;

?

b)Transmitter should be placed in a clean, ventilated, dry place;

?

c)Need to inspect every two years, for high precision users, instrument

need to be submitted to censorship.

?
?

?


Meter Characteristic

?????

????????? 1). Easy for installation

?

????????? 2).High accuracy, it is up to ±0.2%,it is capable for testing


3).?It?provides?the?function?of?zero?correction?of?sensor?and?automatic?zero?adjustment.


4).?It?has?multi-language?interface?to?satisfy?all?the?users’?requirements.


5).?It?has?the?function?of?self-adjustment?and?self-checking.


6).?It?has?lightning-protection?and?electricity-protection?circuits. The?effective,?

anti-interference?circuits?apply?to?all?kinds?of?bad?environment.


?

- - - -
MTF
Electromagnetic
flow?meter | | | | |
Divided type | Integrated?
type(IP67) | Explosion-
proof?
integrated | Battery
powered??
type | Heat(energy)?type |
Accuracy | ±0.2%??or?±0.5% |
Diameter | DN15~dn2400 | DN15~DN600 | DN25~DN1400 |
Flange | Comply?with?GB9119?Standard?carbon?steel(stainless?steel?is?optional) |
Pressure | DN15~DN1600?1.0,
1.6,2.5,4.0MPa?
DN700~DN2400?0.6,
1.0,1.6MPa | DN15~DN600?1.0,
1.6,2.5,4.0MPa | DN15~DN600?1.0,1.6,2.5,
4.0MPa?DN700~DN2400?0.6,
1.0,1.6MPa |
Please?consult?us?if?you?need?special?pressure |
Liner | PTFE,PU,CR,PFA,F46,IR |
Conductivity | ≥5μs/cm(Please?consult?us?if?it?is?less?than?≥5μs/cm) |
Electrode | 316L,Hastelloy,Ti,Ta,PT-It |
Protection?Level | IP67(For
sensor,?
IP28?is?
optional) | IP67 | IP67 | IP68 | IP67??IP68 |
Medium?Temperature | -25℃~180℃
(Please?
refer?to liner
?material) | -25℃~80℃(Please?
refer?
to?liner?material) | -25℃~180℃
(Please?refer?to
?liner?material) |
Influence?of?Ambient
?temperature | -25℃~60℃<±0.1%/10℃?or<±0.25%/10℃ |
Repetition | ≤±0.1%,±0.25% |
Analog?output?Error | ≤±0.02mA |
Current | ≤20m/s |
Electrical?connection | M20*1.5seal,G1/2,NPT1/2 |
Output?interface | Standard?output(4~20mA),Pulse?output,RS485,HART,Profibus-PA |
- - - -

?

Read More