Air-compressing & Air-separation

Share us

Hand Held Metal Engraver For Metal Stainless Steel , Desktop Engraving Machine 20W

LB-MF

Description

?

20W Jewelry Ring Desktop?Portable Fiber Laser Marking Machine?

?
?
Brief introduction:

?

The machine is used in metal and nonmetal materials, stainless steeel, aluminum, high hardness alloy steel, ABS, etc.

?

Laser marking machine technical parameters

?

- - - -
Type | LB-MF10 | LB-MF20 | LB-MF30 |
Power | 10W | 20W | 30W |
Beam quality | M2≤1.4 | M2≤1.8 | M2≤1.8 |
Marking speed | ≤7000mm/s | ≤8000mm/s | ≤8000mm/s |
Power consumption | 0.5KW | 0.8KW | 1.2KW |
Fiber Laser | AO Q-Switch Pulse Fiber Laser |
Wavelength | 1064nm |
Laser marking software | EzCad.2.1 |
Working area | 50x50mm-300x300mm |
Minimum Linewidth | 0.01mm |
Repeated precision | ±0.001mm |
Min characters | 0.15mm |
Cooling system | air-cooling |
Location System | Red dot indicater |
Power supply | AC220V/50Hz |
Control System | Ezcad Motion Control Card-PC |
Dynamic Focusing device | Yes |
Dimension | 800x680x1200mm |
- - - -

?

?

Standard Accessories (Fiber Laser Marking Machine)
Germany IPG or China Raycus

Galvo tech Scanner

A semiconductor module
A set of high-speed vibrating mirrors
A set of marking control system

A set of laser marking sysytem
An industrial computer
A marking work table
A red laser pointer
A pedal switch
A set of marking software
A & quot;Instruction Book& quot;, & quot;Operation Manual& quot; and & quot;Training Video”

?

?

Parts of laser marking machine

?





?

Feateures

?
# # a. Using the third generation of optical fiber solid laser, the electro-optical onversion ecfficiency of pump light source can reach to 80% after fiber coupling. Higher beam quality, long use time, laser life can reach 100000 hours(Lamp pump YAG is around hundreds of hours, semiconductor is around 10000 hours).
# d. Air-cooling, no consumables, free maintenance, save power and energy(total power is 500W), low cost of latter usage, the annual electric savings would be around USD3000-5000.
# b. Perfect beam quality achieved the highest and excellent marking effect. And it has great advantages of doing anti-white,matte,chromatic...on the stainless steel.
# c. Adopted imported high-speed scanning head, and combined with software makes engraving very fast, so the processing speed is 3 to 5 times quicker than the ordinary YAG and DP semiconductor.
# e. High electrooptical efficiency: integrated electooptical efficiency reaches above 20%, greatly saved power consumption and operation cost.
# f. Absolutely environmental marks without intermediate mediators involved in processing, completely in conformity with ROHS Standards.
# g. Integrated modularization design, convenient maintenance, and the small volume can save more space.
# h. Support JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW and other documents, and can form the serial number,production date, bar code and QR code automatically.
# i. Optional rotary workable and other automated matching system.


?

Package

Packing dimension: 900x780x800mm

Volume:0.5CBM

Gross weight: 50kg

?



?

Our serive

?

Pre-Sales Service
Whether you are a dealer/distributor/trader/agent or an end user, as long as you are interested in our laser machines and related products, once you contact us, we will arrange a particular professional at your service to help you have a deep understanding of LEADBOOM LASER and our products or answer your questions on laser products and laser applications. In order to keep open and convenient communication with you, LEADBOOM LASER integrates sales and service as one and the same responsible person is in charge of your sales and service.

?

Production Process:
Machine Case---Mechanical Parts Installation---Electrical Parts Installation---Machine Commissioning--- Aging Test for at Least 24 Hours --- Nameplate, Logo and Packaging---Shipping

?

On-Time Delivery
After you confirm the order, we will figure out the delivery date according to the model and production schedule. For general models, we will arrange production in 7 days or so and we will notify you of the exact production process.

?

After-Sales Service
1. All of our machine will be fully-checked by our quality control department before the shipment. We guarantee all of our laser machines have a one-year warranty (quick-wear parts not included).

2. Training 1-2 technician with free.

3. Numerous feedback from our clients have proven that our laser machines are stable in performance with rare malfunction. However, we would like to handle it as follows once malfunction occurs:
a.We guarantee that we will give you a clear reply within 24 hours.

4. Training details: operation principles, system and structure, safety and maintenance, software, the processing technique, and so on.
b. Customer service staff will assist and guide you to analyze the malfunction in order to locate the cause.
c. If the malfunction is caused by improper operation on software and other soft faults, we will help solve the problem on line.

d. We will offer plenty of online supports, just like detailed technical and installation instructions by email, video, telephone.

?

FAQ:

?

Q: Do I need two laser machines to engrave and cut separately?
A: No, the laser machines we provide are capable of both engraving and cutting. One machine alone can fulfill the two purposes.

?

Q: Do the laser machines need to be connected to a laptop or desktop computer to work?
A: Yes, either is ok. It supports Windows 2000, Windows XP, Win 7 and other operating systems

?

Q: How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length (relatively speaking, the longer, the bigger)
2. Laser tube diameter (relatively speaking, the thicker, the bigger)
3. The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger. So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 65W.

?

Q: In general, how long is the service life of a laser tube?
A: Generally, a laser tube’s service life can reach 3500 hours to 9000 hours depending on the specific usage. For example, if it works 8 hours per day, the detailed data is as follows:
1. If you set the power at 20-30% of the total power, the service life is about 1-2 years.
2. If you set the power at 40-50% of the total power, the service life is about 1 year.
3. If you set the power at 70-80% of the total power, the service life is about 6-8 months.

?

Q: What kind of graphic format does it support?
A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc.

?

Q: How can I tell the power of a laser tube has been exhausted?
A: The beam color of a new laser tube in operation is purple. When the power is gradually depleted, the color will become white.

?

Q: Is it better to increase blow to improve laser processing performance?
A: For some thick materials, it works. But, when carving some other materials, you need to blow less.

?

Q: How long will it take to learn to operate a laser machine?
A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power.

?

Q: Is a laser machine in operation harmful to our bodies?
A: It is not harmful as long as the laser is not exposed directly to skin and eyes.

?

?
?
Our company

?

- - - -
Dongguan Leadboom Photoelectric Technology Co., LTD., is dedicated to researching and developing laser equipments and mass manufacturing for our customers overseas since 2002. And we have built long term strategic partnerships with the COHERENT, SYNRAD, II VI from the US, and MITSUBISHI, Panasonic from Japan, and Rofin, IPG from Germany,etc. Our main products including CO2 laser wire stripping machine, fiber laser wire stripping machine, fiber laser marking machine, CO2 laser marking machine, CO2 laser cutting machine, laser engraving machine, solid laser welding machine series over 20 sets of laser equipment, etc. | |
- - - -

?



?

?

Other models(laser marking machine and laser cutting machine)

?









?

?

Leadboom?Laser, always at your service!

?

cheap prodocuts, china suppliers,

Read More

Previous

Air Cooled Portable Laser Marking Machine 220V / 50Hz For Qimo Accessories...

Previous

No Power Coupling Loss Fiber Laser Engraving Machine For Various Nonmetal Materials...

Dongguan Leadboom Photoelectronic Technology Co., Ltd.

Fiber Laser Engraving Machine,CO2 Laser Engraving Machine,Fiber Laser Marking Machine

Address: 3rd Floor, Bldg 9, Huaqiang road, Shangsha community,
Dongguan, Guangdong
China, 511700

Tel: 86-769-85357951
Fax: 86-769-85357951

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多