Motors & Engines
Description
?
USB-Fiber Laser Control Card/Fiber laser machine /Laser Marking Card
?
Quick?Detail:
?
Fiber laser marking card can be used to control the fiber laser machine to marking,engraving,cutting? on surface of material.Software EZCAD Support CO2,YAG,IPG,SPI and so on laser type. Work stable. Operation simple.Easy to learn.
?
?
USBLMC marking control card is developed specially for marking machine, it adopt USB interface form.? USBLMC marking control card is made up of two PCB board: Main-board and IO board. Main board and IO board are connected by two sockets which with 50 pins. The main boards are the same, the IO board is divided into three different kinds by application: Optic fiber? module? (IPG), common digital module, and common analog module. Among them, common digital module is? with a conversion board.
?
?
Description:
?
# Support multi-card working pattern. One computer can control 8 sets of USBLMC at a time, makes and marks the control board to run side by side and operate. Different contents can be processed by 8 sets of control cards.
# Marking-on-fly
Flying?encoder?can?be?connected?to?do?real-time?liner?speed?checking?for?good?result?of??high?speed?
marking
# Extend?axis?(step?motor?/?servo?electrical?motor)?output
Can?output?two?directions/pulse?signals?of?channels?to?control?step?motor?(or?servo?electrical ?motor),?applicable?to?pivot?or?join.
# Start?signal
Used?when?marking?contents?are?the?same?and?high?speed?is?required.?The?Floor?push?can ?connect?to?Start?signal,?or?to?the?common?input?signal?as?well.?If?there?are?variables?in?marking ?content,?they?have?to?be?connected?to?the?common?input?signal.
?
# Compatible?with?USB2.0?/?USB1.0
?
Applicable?scope:
?
# Laser?Marking
# Laser?Engraving
# Drilling?circuit?board?with?holes
# Cutting?cloth
# Cutting?paper
# Laser?marking?on?metal
Function:
# Fly?marking?
# Ruler?mark
# 4?kinds?of?Hatch
# Two?axis?control
# Multi-head?
# Vision?mark
Specifications:
?
- - - -
FEATURE |
USBLMC?marking?control?card?uses?5V?power.? |
Mark-on-fly:encoder?can?be?connected?to?the?board?to?measure?the?fly?speed?. |
Multiple?boards?on?1?computer:?One?computer?can?control?up?to?8?control?board?to?mark?different? pattern?simultaneously |
Common?digital?input?/?output?signal?(TTL?signal) There?are?10?routes?input?and?7?routes?output? signal |
Re?Mark(cache?contents?repeat?marking?)signal:Used?in?the?case?of?marking?same?content?at?high? speed |
Laser?Err?signal?will?be?active?when?there?is?fault?in?the?laser?Source?,Open-drained?output. |
Compatible?with?USB2.0?/?USB1.0 |
- - - -
?
?
?
- - - -
CARD?PARAMETER |
Electrical?Parameter |
Power?supply?parameters:?DC5V/3A |
Connector:?USB?connector/DB?connector |
Signal:?10?routes?input?and?7?routes?output?signal |
- - - -
?
?
?
- - - -
Precautions |
Carefully?check?your?application?program?before?running?it.?Programming?errors?can?cause?a?break? down?of?the?system.?In?this?case?neither?the?laser?nor?the?scan?head?can?be?controlled. |
Protect?the?board?from?humidity,?dust,?corrosive?vapors?and?mechanical?stress. |
For?storage?and?operation,?avoid?electromagnetic?fields?and?static?electricity.? These?can?damage?the?electronics?on?the?product.?For?storage,?always?use?the?anti-static?bag. |
The?allowed?operating?temperature?range?is?25℃?±?10℃. |
The?storage?temperature?should?be?between?–20℃?and?+60℃. |
- - - -
?
?
- - - -
ACCESSORIES |
USB?cable | DB25?male/female?socket |
DB9?male/female?socket | Dongle? |
DB15?male/female?socket | CD |
- - - -
?
?
?
Competitive?Advantage:
?
Work?stable,operation?simple,easy?to?learn,famous?software?EZCAD,low?cost,USB?connection.
?
Read More
Previous
Multi Function EZCAD USB SPI Laser Control Card For Ruler / Fly Marking...
Beijing JCZ Technology Co. Ltd
EZCAD Laser Marking Software,Laser Engraving Software,3D Laser Engraving System
Address: M3 building, No1 East Road of Jiuxianqiao, Chaoyang district, Beijing China,
Beijing, Beijing
China, 100000
Tel: 86-010-64426995
Fax: 86-010-64426995
