Machinery & Equipment

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Machinery & Equipment

Share us

CNC Double Glazing Glass Manufacturing Machine

LWZ2500

Send Inquiry

Description

CNC Double Glazing Glass Manufacturing Machine

washing machine
1.The washing part was welding by stainless steel,it is high strength and shape will not change ;the top parts made from 5 mm thick stainless steel; the bottom is made from 5mm thick stainless steel,the lateral is made from 2mm thick stainless steel.
2.OMRON recgonization system for low-E glass, it can auto recognition the coating side of the low-E glass.if it is Low-E glass,the hard brushes will apert avoid damaging the coating of glass.
3.Two pairs of Low-E brushes,one pair common brush.The diameter is 180 mm,four sprayer.Glass washing speed is about 10-12 m per minute.
4.The sping is stainless steel and can adjust 3-20 mm for different thickness of glass.
5.All part contact water include the axle in the washing machine is stainless steel,copper or waterproof aluminum,nylon and so on, it will not rust for long time running,and easy to maintain.
6.Gear driving system take chain reaction so it will not leave the original positon after long time runnning.
7.Two sets of air knife and two sets of sponge rollers, improved the glass cleaing drying speed. The dry part frame is stainless steel wil not dirty the glass second time.
8.The circle hot wind down the noice come from the machine( in winter the hot wind temperature can reach 40 even no heating).
9.The stainless steel water tank+china top brand Guangdong Lingxiao stainless steel motor+water filter,to keep the water clean and no second time pollution.

Model LWZ2500
Motor Power 380V 50Hz 38kw
Brush 3 pairs
Max Glass Size 2500*3500 mm
Min Glass Size 450*350 mm
Air Compressor 0.8 M3/min 0.6-0.8 Mpa
Glass Thickness 3-15 mm
Conveying Speed 45 m/min
Max Insulating Glass Thickness < 50 mm
Glass Washing Speed 2-8 m/min
Weight 8500 kg
Dimension 24300*2800*3450 mm

Read More