Energy Saving

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Energy Saving

Share us

Socket Fittings

No.1-1

Send Inquiry

Description

Socket Weld FittingsA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve,Website:http://www.alllandsteelpipes.com, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smallerSocket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.Some details of Socket Weld fittingsSW Fittings are family of high pressure fittings which are used in various industrial processes.They are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted, and for steam 300 to 600 PSI.They are used in areas where pipe-work is permanent and are designed to provide good flow characteristics.They are produced to several ASTM standards and are manufactured in accordance with ASME B16.11. The B16.11 standard covers pressure-temperature ratings, dimensions, tolerances, marking, and material requirements for forged carbon and alloy steel. Acceptable material forms are forgings, bars, seamless pipe, and seamless tubes which conform to the fittings chemical requirements, melting practices, and mechanical property requirements of ASTM A105, A182, or A350.They are available in three pressure ratings: Class 3000, 6000 and 9000.Advantages:The pipe need not be beveled for weld preparation.Temporary tack welding is no needed for alignment, because in principle the fitting ensures proper alignment.The weld metal cannot penetrate into the bore of the pipe.They can be used in place of threaded fittings, so the risk of leakage is much smaller.Radiography is not practical on the fillet weld; t

Read More