Air-compressing & Air-separation
Description
1.0 - 25.0mm Diameter Square End Mill? , Four Flute End Mill
?
Specifications
1) Four Flutes End Mills?
2) Coated with TiAlN,TiCN ?TiN and ARCO
3) HRC Can Reach 65 Degree?
4) High hardened steels and high speed
?
?
?Description:
?
We use 100%? original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills with very strong abrasive resistance and impact strength.
?
Original?raw?micro?grain?material,?high?hardness?and?T.R.S.?
?
???1,?Co:?10-12%,?WC:?88-90%,
?????? Grain?size:?0.2-0.6μm,
?????? Hardness:?92.5-94.0?HRA,
?????? T.R.S.:?4200-4800?N/mm2,
?????? Density:?14.3-14.8?G/cm3
?
???2,?We?got?250T?Extruder,?10MPa?Overpressure?Sintering?Furnace-Vacuum
???????Dewaxing,?these?two?equipments?are?very?very?important?for?manufacture?and?high?quality?carbide?rods.
?
???3,?We?use?our?own?carbide?rod?for?90%?of?cutting?tools.?
?
???4, We have introduced advanced CNC grinding machines in operating,Rollomatic,Schneeberger from Switzerland, ANCA from Australia, Zoller from German,KEYENCE from Japan,set? up(Japan FANUC, brother processing center) tool laboratory?? test cut.Our technology from Taiwan.Guarantee high precision and good performance.
?
?? 5,?Helix?Angle:?38-42?°(we?could?do?4?of?them?are?37°)
?????????Diameter?of?cutting?edge: 1-25mm
?????????Diameter?of?rods:?4-25mm
?????????Length:?50-150mm
?????????Cutting?Form:?Ball?nose,?Corner?Radius,?Taper?Flute,?etc.
?????????Flutes?No.:?2-6
?
???
Super?coating
?
?????TiSiN??TiAlN??AlTiN?or?TiCN?,
?????improve?tool?life,?reduce?the?coefficient?of?friction.
?
?
?Applications:
?
????Copper,?Aluminium?Alloy?,?Cast?Iron,?Carbon?steel,?Tool?steel,
????Mould?steel,?Die?steel,?Stainless?steel,?Plastic,?Arcylic,?etc.?
?
?
?Price?Performance?Ratio:
?
?? From?tungsten?powder?to?end?mills,?that& acute;s?the?reason?of?our?competitiveness!
???Make?sure?about?each?piece?end?mill?has?a?good?quality,high?precision?and?good?performance.
???More?discount?will?be?offered?according?to?exact?quantity.
???Welcome?to?be?our?agents,?OEM?is?also?available.
?
?
Specifications:
?
- - - -
Model?NO. | Diameter/D1 | Flute?Length/L1 | O.A.L/L3 | Shank?Dia/D2 |
JT2010 | 1.0 | 3 | 50 | 4 |
JT2012 | 1.2 | 3 | 50 | 4 |
JT2015 | 1.5 | 4 | 50 | 4 |
JT2015-75 | 1.5 | 4 | 75 | 4 |
JT2020 | 2.0 | 5 | 50 | 4 |
JT2020-75 | 2.0 | 5 | 75 | 4 |
JT2025 | 2.5 | 7 | 50 | 4 |
JT2025-75 | 2.5 | 7 | 75 | 4 |
JT2030-3 | 3.0 | 8 | 50 | 3 |
JT2030 | 3.0 | 8 | 50 | 4 |
JT2030-75 | 3.0 | 8 | 75 | 4 |
JT2030-100 | 3.0 | 8 | 100 | 4 |
JT2035 | 3.5 | 10 | 50 | 4 |
JT2040 | 4.0 | 10 | 50 | 4 |
JT2040-75 | 4.0 | 10 | 75 | 4 |
JT2040-100 | 4.0 | 10 | 100 | 4 |
JT2045 | 4.5 | 13 | 50 | 6 |
JT2050-5 | 5.0 | 13 | 50 | 5 |
JT2050 | 5.0 | 13 | 50 | 6 |
JT2055 | 5.5 | 13 | 50 | 6 |
JT2060 | 6.0 | 15 | 50 | 6 |
JT2060-75 | 6.0 | 15 | 75 | 6 |
JT2060-100 | 6.0 | 15 | 100 | 6 |
JT2070 | 7.0 | 17 | 60 | 8 |
JT2080 | 8.0 | 20 | 60 | 8 |
JT2080-75 | 8.0 | 20 | 75 | 8 |
JT2080-100 | 8.0 | 20 | 100 | 8 |
JT2090 | 9.0 | 25 | 75 | 10 |
JT2100 | 10.0 | 25 | 75 | 10 |
JT2100-100 | 10.0 | 25 | 100 | 10 |
JT2110 | 11.0 | 28 | 75 | 12 |
JT2120 | 12.0 | 30 | 75 | 12 |
JT2120-100 | 12.0 | 30 | 100 | 12 |
JT2120-150 | 12.0 | 30 | 150 | 12 |
JT2140 | 14.0 | 35 | 100 | 14 |
JT2160 | 16.0 | 40 | 100 | 16 |
JT2160-150 | 16.0 | 40 | 150 | 16 |
JT2180 | 18.0 | 40 | 100 | 18 |
JT2200 | 20.0 | 45 | 100 | 20 |
JT2250 | 25.0 | 45 | 100 | 25 |
- - - -
?
?
?Products?display
?
?
?
Read More
Dongguan Diamond Hardware Factory
Square End Mill,Ball Nose End Mill,Corner Radius End Mill
Address: D2-53 JuHe plaza,Henan industrial park,JinSha village,Chang An town,Dongguan city,China,
Dongguan, Guangdong
China, 511700
Tel: 86-769-85470938
Fax: 86-769-85470938
