Electronics Production Machinery

1. Home
2. Products
3. Electronic & Electrical
4. Electronics Production Machinery

Share us

Household Active 2 Wire Din Rail Single Phase Energy Meters With LCD Display

YEM011JC

Send Inquiry

Description

?

CE Approved Active 1 Phase 2 Wire Din Rail Energy Meter With LCD Display for Household?

?

Product Description:

?

Model YEM011JC is 1 Phase 2 Wire Din Rail Energy Meter.?It adopts many advanced technologies of research and development, like micro-electronics techniques, specialized large-scale IC (integrated circuit), digital sampling and processing technology, SMT technology, and so on.?The meter is produced as per?relevant technical requirements of international standard IEC 62053-21. It has class one high accuracy. You can?select 35mm DIN rail installation or install it on the board. This energy meter is intended for househould use.

?

Specification

?

- - - -
Model | Accuracy | Reference Voltage | Current Specification | Starting Current | Insulation Performance |
YEM011JC | Class 1 | 127/230V | 5(30)A 10(50)A 20(100)A | 0.02A 0.04A 0.08A | AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
- - - -

* If you need different reference voltage or current specification, please advisory our sales personnel.

?

Competitive Advantage

?

1. 35mm standard DIN rail installation.

?

2. The meter can accurately measure and display total active energy consumption by LCD Display.?

?

3.?LCD display 6+1 display default, also can make it?5+2 (two decimal) dispaly.

?

4. Standard configuration Impulse output passive (polarity),May select distant impulse output passive (no polarity). And contact with all kind of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.

?

5. Two LED instructions respectively power supply state (green) and signal of energy impulse (red)

?

6.?Standard configuration don’t detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions by an individual LED.

?

7. The?meter?adopts?latest?imported?integrated-circuit?exclusively?for?electrical?energy?with?digital?

multiplier,?which?has?greatly?improved?the?dynamic?working?range?of?the?meter?and?make?the?actual?

overload?capacity?up?to?more?than?10?times.

?

8. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of connection, and use CT (Product Configuration code is IC) and PT & CT (Product Configuration code is HC) for operation.

?

9.?Extension terminals cover is available, in order to ensure safety.

?

Dimension

?

? ? ??

?

Wiring Diagram

? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

Read More