Electronic Signs

1. Home
2. Products
3. Electronic & Electrical
4. Electronic Signs

Share us

2T Cobalt / Tungsten / Titanium Magnesium Melting Furnace Low Consumption

AIA-1

Send Inquiry

Description

2T Medium Frequency Coreless Induction Magnesium Melting Furnace ?

Low-Consumption?
?
Complete set supply range


1. Furnace body ,hydraulic tilting device
2. Water cooling cable
3. Medium frequency power supply
4. Capacitor cabinet
5. Low voltage power control cabinet
6. Water temperature and water pressure alarm
7. Furnace leak alarm
8. Spare parts of equipment
?
?
Description
?
? This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve?heating?and?melting?and?is?applicable?to?melting,heating?or?holding?of?steel,copper,iron,aluminum,zinc,tin,

nickel silver and other ferrous or nonferrous metal and alloy material,as well as heating treatment prior to forging,sintering and tube-bending forming in casting and melting industries.?
?
?
Specification

?

- - - -
Product? Model | GWM? 0.6?-?360 | GWM 1?-?500 | GWM 1.5?-?750 | GWM? 2?-?1000 | GWM? 5?-?1800 |
Rated?Capacity | 600?KG | 1?T | 1.5?T | 2?T | 5?T |
Rated?Power | 360?KW | 500?KW | 750?KW | 1000?KW | 1800?KW |
Rated?Voltage | 380?V | 500?V | 1000?V | 2000?V |
Transformer?Capacity | 400?KVA | 630?KVA | 1000?KVA | 1250?KVA | 2000?KVA |
Melting Mg 750℃ | Melting Rate | 0.7?t/h | 1?t/h | 1.51?t/h | 2.04?t/h | 3.67?t/h |
Power consumption | 510?kw.h/t | 500?kw.h/t | 495?kw.h/t | 490?kw.h/t | 490?kw.h/t |
Water?Consumption | 8?m3/h | 10?m3/h | 15?m3/h | 18?m3/h | 30?m3/h |
Over?Size?(M) | 2.5*1.9*2.3 | 2.7*2*2.7 | 3*2.1*2.8 | 3.3*2.3*3.1 | 4.1*2.8*3.8 |
- - - -

?
Application
?
1. It is used for melting non-ferrous metal, ferrous metal and nonmetallic part. Our?factory produce smelting furnace and vacuum smelting furnace.
2. The melting furnaces mainly used for smelting steel, iron, copper, stainless steel,?aluminum, gold, silver, precious stones, metallic and non-metal;
3. The vacuum melting furnaces is mainly used for smelting heated metal or non-metal under?the environment of protecting atmosphere or vacuum (such as cobalt, tungsten, titanium,?etc)
?
?
Features
?
1. Using a zero-voltage scanning soft-start mode, in any case may at any time to start or?stop.
2. Fast smelting with low production cost; low-pollution and environment-friendly ;
3. Dissolved material will be fully dumped?clean. Molten material easy to replace.
4. Power adjustment flexibility. Be able to continuously smooth adjustment.
5. Temperature?uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
6. Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump?convenience, according to the need to use electric, manual, hydraulic tilting furnace and?other means.
?
?7. Low energy consumption

?The entire textile fiber blanket module, the heat insulation effect is good, and low energy store, the heat loss is small.

?The large-scale trolley furnace can be separated into many different sized heating chambers.

Different sized work pieces can be put in appropriate heating chamber. The energy conservation is especially low.

?

?

Installation
?
1. Under the following conditions are satisfied, the seller’s installation and?construction team will start equipment installation and commissioning for a period of four?weeks.
2. Infrastructure installation, civil construction, maintenance have been completed, and?meet theinstallation requirements.
3. The cooling water pipes are connected in place. Pressure and flow meets the seller’s?demand.
4. The lifting equipments are placed to cope with the construction in the suitable?condition.
Note: Equipment installation will be in accordance with the plan graph agreed by the?related sides. The buyer can decide the installation location according to the site?conditions, including cooling towers, transformers and other equipments, which should be?within a reasonable distance;
?
?
Others
?
1. When 3 set coils with different size,it can be customized free.
2. The graphite / Zirconia crucible can be provided to match different melting materials,?weight and size.
3. When you choose furnace,pls consider the melting material, weight and size.
4. The melting?material decides the crucible material. The weight and size decides the crucible size.
5. If you need install the IR thermodetector to the furnace, we can provide a built-in port?on the furnace for convinient connection.

Read More