Materials Handling
Description
?
?
Automatic Double Crank Stretch PET? Blow Molding Machine For? Bottle
?
?
Quick Detail:
HB-A2400 Full automatic bottle blow molding machine can produce PET containers including the bottles for kinds of wine, drink, soybean, vinegar, and pesticide shape and diameter. It has automobile system with high efficiency. The distant infrared ray heat pipes are used in the machine. It has high pressure protection with the feature of precisely removing mould. It is easy to maintain .It is the equipment for producing PET bottles.
Machine main components adopt world famous brand, e.g.:
? PLC: DELTA (TAIWAN),
? Blowing valve: PARKER(American)
? Acting valve: YSC(Korea)
? Air Cylinder: MOHE(Joint, Japan)
? Silencer: ALWITCO(USA)
? Photoelectrical switch: Korea
? Fan: Germany
? Pressure gauge: AIRTAC(Taiwan)
? Rotation cylinder: FESTO(Germany)
?
?
Specifications:
HB-A2400 BMM Technical Parameters
- - - -
TYPE | ITEM | HB-A2400 |
CONTAINER | Number of cavity | 2 |
Theoretical output | 1600-2400 pcs/hr |
Max.container volume | 2L |
Max.neck diameter | 65mm |
Max.container diameter | 100mm |
Max.container height | 350mm |
ELECTRICAL SYSTEM | Number of lamp | 16 pcs(1500w/pcs) |
Max.heating power | 27kw |
Installation power | 29kw |
Actual power consumption | 12-16kw |
AIR SYSTEM | Operatating pressure | 0.7Mpa |
Low pressure consuming | 1000-1200 Ltr/min |
Blowing pressure | <3.5Mpa |
High pressure consuming | 1200-1500Ltr/min |
WATER CHILLER | Operating pressure | 0.5-0.6Mpa |
Temperatuer | 10-12℃ |
Consuming | 3600kcal/hr |
Flow rater | 20Ltr/min |
MACHINE | Machine dimension | 3.1×1.75×2.5(m) |
Machine weight | 2.2T |
- - - -
?
?
Main Features:
1.Stable performance with advanced PLC.
2.Conveying preforms automatically with conveyor.
3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5.High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8.Strong clamping force with high pressure and double crank links to lock the mold.
9.Two ways of operating: automatic and manual.
10.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12.Contamination is avoided for the bottle body.
13.Ideal effect of the chilling with the chilling system.
14.Easy installation and starting
15.Low rejection rate: less than 0.2 percent.
?
Read More
Hisson Plastic Machinery Co. Limited
Plastic Injection Molding Machine,Hydraulic Injection Molding Machine,Horizontal Injection Molding Machine
Address: Room 705, No.2-6, Green Life Square, Simingzhong Road, Yingzhou, Ningbo, China.,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-87170279
Fax: 86-574-87170428
