General Parts
Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial
HI-P268
Description
?
?
Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial
?
?
Quick Detail:
?
HI-P268 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 268tons, real shot weight 1100g.
Machine main components adopt world famous brand, e.g.:
? Controller:TECHMATION (TAIWAN),
? Low voltage contactor: SCHNEIDER(FRANCE),
? Low voltage air switch: SCHNEIDER(FRANCE),
? Proportional Valve: Dofluid HNC(TAIWAN)
? Oil pump: VICKERS(USA)
? Directional Valve: VICKERS(USA)
? Induction travel switch: OMORON (JAPAN)
? Inductor potentiometer: FORT(USA)
?
?
?
Description:
?
HI-P268 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-600g, neck size 15mm to 120mm.
HI-P268 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
?
?
Applications:
?
Available mold cavities on HI-P268 PET Preform Injection Molding Machine:
For PET perform 18g-20g, 15mm-20mm, mold cavity can be:? 8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 16g-48g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be:: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 50g-500g, 45mm oil neck, 60mm-120mm wide mouth, mold cavity can be:: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,
?
?
Specifications:
?
HI-P268 Technical Parameters
- - - -
HI-P268 | Parameters (Special design for PET) |
TECHNICAL PARAMETER TABLE | Unit |
INJECTION
UNIT | SCREW DIAMETER | mm | 70 |
SCREW L/D RATIO | L/D | 25 |
SHOT VOLUME(THEORETICAL) | cm3 | 1100 |
INJECTION WEIGHT(PET) | g | 1166 |
INJECTION PRESSURE | Mpa | 147 |
INJECTION RATE | g/s | 380 |
PLASTICIZING CAPACITY | g/s | 60 |
SCREW SPEED | rpm | 0-190 |
CLAMPING
UNIT | CLAMP FORCE | Kn | 2680 |
OPEN STROKE | mm | 550 |
MAX.MOULD HEIGHT | mm | 600 |
MIN.MOULD HEIGHT | mm | 230 |
SPACE BETWEEN TIE BARS | mm | 570×570 (W×H) |
EJECTOR FORCE | Kn | 65 |
EJECTOR STROKE | mm | 150 |
GENEREL | EJECTOR NUMBER | n | 9 |
PUMP PRESSURE | Mpa | 16 |
PUMP MOTOR POWER | KW | 30 |
HEATING POWER | KW | 21.5 |
MACHINE DIMENSION | m | 6.1×1.5×2.2(L×W×H) |
MACHINE WEIGHT | T | 8.0 |
Hopper Capacity | L | 50 |
Oil Tank Capacity | L | 580 |
- - - -
?
?
Platen size(facing):
?
?
?
Platen size(aside):
?
?
?
Competitive Advantage:
1. This machine adopt special PET screw, prolonged screw and barrel will ensure PET plasticizing effect, to make performs with good brightness and transparence, the production is with low defect.
2. Increased oil pump’s power
3. Increased heating ring’s power
4. Heaters adopt ceramic, the using life is double than stainless steel.
5. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.?
6. The machine equipped with 7 inch colorful screen controller, brand Techmation from Taiwan, the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
7. The machine equipped with hydraulic protection
8. The machine equipped with double Hydraulic pulling device
9. The machine equipped with double Air Ejector
10. The machine equipped with single slots on the mold plates,
?
?
Special designed points for PET(for HI-P series injection molding machine)
Characteristics of PET resin
1. melting point: 250℃-260℃, molding temperature scope of PET is from 255℃-290℃, improved GF-PET can reach 290℃-315℃.
2. Low viscosity degree.
3. Strong moisture absorbing ability.
Our machine’s special design for PET
L/D:25, this is the standard parameter of our PET series injection molding machine.
Enlarged screw diameter and length.
Increased oil pump’s power.
Increased heating ring’s power.
?
?
?
?
Read More
Hisson Plastic Machinery Co. Limited
Plastic Injection Molding Machine,Hydraulic Injection Molding Machine,Horizontal Injection Molding Machine
Address: Room 705, No.2-6, Green Life Square, Simingzhong Road, Yingzhou, Ningbo, China.,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-87170279
Fax: 86-574-87170428
