Plastic Machinery

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Plastic Machinery

Share us

688kva 550kw Cummins Diesel Generator With AC Generator Protection

C690D5

Send Inquiry

Description

?

Packaging & Delivery:

Packing: Plastic film package as stardard, or according to?customer requirements.

Delivery time: Normally 20 working days, depends on quantity.

?

Product Description:

1. Cummins original power generator,?High quality and?reliable;

2. Cummins?International Warranty Service;

3. Cummins PowerCommand control systom designed?based on microprocessor with voltage regulation, ?engine protection, AC generator protection etc.

?

Data sheet of C690D5:

- - - -
Diesel generator Specification | 　 |
PROJECT: | 500kw diesel generating set power generation C690D5 |
MODEL: | C690D5 |
　 | 　 |
Section A | 　 |
Diesel generator Technical Specification | 　 |
Generator Set Model: | C690D5 |
Standby Output Power: | 550kw |
Prime Output Power: | 500kw |
Overload | 10% |
Rating Conditions: | In accordance with ISO-3046 reference conditions: |
Governor regulation class | ISO8528 G3 |
Voltage regulation (no load to full load) | ± 1% |
Steady-state voltage variation | ± 1% |
Frequency regulation (no load to full load) | Isochronous(0%) |
Steady-state frequency variation | ±0.25% |
EMC compatibility | BS EN 61000-6-4 / BS EN 61000-6-2 |
Voltage | 400 VAC |
Frequency | 50Hz |
Speed | 1500 rpm |
P.F. | 0.8 |
Governor Type: | Electrical type |
　 | 　 |
Section B | 　 |
Technical Specification of Engine | 　 |
Engine brand: | Cummins |
Engine Model: | KTAA19-G6A |
Configuration | Cast iron, in-line, 6-cylinder |
Displacement, L | 18.9 |
Compression ratio | 13.0:1 |
Aspiration | Turbocharged and air-to-air aftercooled aftercooled |
Fuel system | Direct injection |
Bore* stroke, mm | 159*159 |
Rated speed, rpm | 1500 |
Governor type | Electronic |
Starting voltage | 24V, negative ground |
Battery charging alternator | 24V,35A |
　 | 　 |
Technical Specification of Alternator | 　 |
Main Alternator Model | Stamford HCI544E |
Configuration of Main Alternator | Brushless,PMG,Single bearing,Air cooling |
Voltage | 230/400V |
Frequency & Speed | 50HZ/1500RPM |
Power factor | 0.8 |
Voltage Adjust range | ≥5% |
Voltage Regulation NL-FL | ≤±0.5% |
Insulation Grade | H |
Protection Grade | IP23 |
　 | 　 |
Technical Specification of Control panel | 　 |
Control Brand | PCC 1301 |
Control system description

The PowerCommand? control system is a microprocessor-based generator set monitoring,
metering and control system designed to meet the demands of today’s engine driven generator sets. The
integration of all control functions into a single control system provides enhanced reliability and performance
compared to conventional generator set control systems. These control systems have been designed
and tested to meet the harsh environment in which gensets are typically applied. |
? 128 x 64 pixels graphic LED backlight LCD. |
? Digital voltage regulation. Single phase full wave SCR type regulator compatible with either shunt or PMG systems. |
? Digital engine speed governing (where applicable). |
? Generator set monitoring and protection. | 　 |
? Advanced overcurrent protection. | 　 |
? Modbus? interface for interconnecting to customer
equipment. |
? 12 and 24 VDC battery operation. |
? Warranty and service. Backed by a comprehensive warranty and worldwide distributor service network. |
? Certification. Suitable for use on generator sets that are designed, manufactured, tested and certified to
relevant UL, NFPA, ISO, IEC Mil Std., CE and CSA standards. |
- - - -



About us:
Our company founded in 1990, is an authorized dealer of Cummins ?. Our company is gold medal flagship store of Cummins in eastern China.

Read More