Batteries & Chargers
Description
?
?
3U 13W T3 Compact Fluorescent Lamps Color Rendering Index > 80 Ra 127V / 220V
?
?
Description
?
1?. Turn on – off time is more than 12 000 times .
2?. No mercury vapor,using solid mecury technology,Hg < 3mg .
3?. Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance .
4?. For the pack , we have color box , single blister , double blister .
5?. The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .
6?. Using nickleplated aluminum base , very good to avoid getting rusted .
?
?
Lamp parameters
?
- - - -
Tube Parameter for CFL | Type | 3U |
Tube Diameter | ?Φ 9mm |
Wideth | ?/ |
Length | 85mm |
Circle | ?/ ? |
Color Rendering Index | ?> 80 Ra |
SDCM | ?< 5 |
Color Temparature | 2700K - 6400K |
Luminous Efficency | ?> 55lm / w |
2000h Luminous Depreciation | ?< 15% |
Responsive Time | ?< 0.5s |
Turn on off time | ?> 10 000 times |
Luminous Decay | Less than 15% at 2000hrs |
Powder | 100% A - gradeTriphosphor |
Electronic Parameter for CFL | Power | 13W |
Power Factor | ?> 0.5 |
Working Voltage | 110V - 127V / 185 - 265V |
Transister / Capacitor | Huajing / Aishi |
Base | Size | E27 |
Materials | Nickelplated Aluminum |
Type | Soldering |
Plastic cover | Wideth | 42mm |
Materials | PBT |
No middle cover |
Operating Temp. | ?-?30 ℃ to + 40 ℃ |
Life Time | ?> 8000H |
Time need to be stable | 3 Mins |
Lumen | ?> 650 LM |
- - - -
?
Features
?
1 . Power : 13W
2 . P.F. : > 0.5
3 . Power consumption: < 10%
4 . Lead free glass tube
5 . Compact type , integrate the ballast in the lamp
6 . 100% triphosphor A - grade powder
??????1 ) Luminous efficency: > 60 lm / w
??????2 ) Brightness maintance: > 80% after 2000H
??????3 ) CRI : > 80 Ra
??????4 ) SDCM : < 5
?
Competitive advantage
?
1 . Strict raw materials inspection .
2?. In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .
3?. we are testing every lamp before packed in the cartons .
?
Application
?
Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .
?
Quality Control ( QC )
?
1 . We have 4 QCs to check the raw Materials , such as tube , Transister , Electrolytic . capacitor , inductor , resister , diode , magnet ring , capacitor , PCB board , plastic cover .
2 . Before the mass production , our Technicians will tune the technical parameters of each items to make sure the Wattage , P.F. living up to the requirement of customer,and also will do the High temperature and high voltage test ( llight it in the oven ) , doing the destructive test , and also will do the turn on off test , to make sure the life time of the lamp , also do the start tets in low temperature and low voltage ( light in the fridge ) .
3 . In the mass production , our QC will take selective examination on every step , such as Plug - in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .
4 . we are testing every lamp before packed in the cartons .
5 . In the warehouse , our QC will take sampling inspection before load the container , if not qualified with the AQL , we will rework .
6 . After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .
?
Read More
JIAXING LECCO ELECTRIC APPLIANCE CO.,LTD
CFL LED Light,LED Bulb Lights,Flat Panel LED Lights
Address: No.1, Jinhe Road, Qinshan Industrial Park, Qinshan Street, Haiyan County, Jiaxing, Zhejiang, China, 314303,
jiaxing, Zhejiang
China, 314000
Tel: 86-573-86408996
Fax: 86-573-86408990
