Cast & Forged
Water Cooling Rubber Conveyor Belt Vulcanizing Press Aluminium Alloy
CZ-CMX/DM HE1W13431
Description
?
Water Cooling Rubber Conveyor Belt Vulcanizing Press Aluminium Alloy
?
?
Production Application
?
conveyor belt vulcanizer, also called conveyor belt splicing equipment or belt vulcanizing press machine.
?
It& acute;s vulcanize equipment and tools for repairing & splicing of conveyor belt. It suits for various conveyor
?
belt, such as EP, Rubber, Nylon, Canvas and Steel cord belt, etc.
The belt vulcanizer is dependable, lightweight and portable machine, which is widely used in the field of
?
metallurgy, mining, power plants, ports, building materials, cement, coal mine, chemical industry, etc.
?
Heating plates are available for rhombic, rectangular and modular type (two or more sets of heating plates
?
together).
?
Technical Parameters
?
- - - -
Model | CZ-CMX/DM HE1W13431 |
Belt Width | 650mm/24-25 inches |
Voltage | 220V 380V 415V 660V 50HZ(Other voltages are also available) |
Fast cooling time | 15 minutes (from 145 degrees down to 70 degrees or less) |
Temperature raise (from normal temperature to 145℃) | no more than 25 minutes |
The temperature difference of heating plate working surface | ±2°c |
Temperature adjustment range | 0~200°c |
Vulcanizing pressure | 0.8~1.2 MPa |
Time of heat preservation | Usually 30mins |
Degree of heating plate | 20°(rectangle other bias angle is also available) |
Suitable for belt type | Common rubber conveyor belt and steel cord conveyor belt |
- - - -
?
When order?(please supply below information, our engineer will make a solution for you)
?
1. Max belt width
?
2. Heating platen length (or please supply belt manufacturer’s recommended splice length)
?
3. What kind of belt, light duty belts or heavy duty belts
?
4. Working Voltage
?
5. Pressure requirements
?
6. Degree of heating platen (standard will be 20 degree)
?
?
Specification
?
- - - -
Model | Belt Width | Platen Size(20?) | Splice Length | Qt. Bolts |
A | B | 100PSI (0.7MPa) | 200PSI (1.4MPa) |
in | mm | in | mm | in | mm | in | mm | sets |
CZ-CMX/DM HE1W13431 | 24-25 | 650 | 34 | 880 | 31 | 800 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14131 | 24-25 | 650 | 41 | 1060 | 31 | 800 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13439 | 30-31 | 800 | 34 | 880 | 39 | 995 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14139 | 30-31 | 800 | 41 | 1060 | 39 | 995 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13448 | 36-39 | 1000 | 34 | 880 | 48 | 1228 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14148 | 36-39 | 1000 | 41 | 1060 | 48 | 1228 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13456 | 42-47 | 1200 | 34 | 880 | 56 | 1430 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14156 | 42-47 | 1200 | 41 | 1060 | 56 | 1430 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13458 | 48-51 | 1300 | 34 | 880 | 58 | 1490 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14158 | 48-51 | 1300 | 41 | 1060 | 58 | 1490 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13465 | 54-55 | 1400 | 34 | 880 | 65 | 1650 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14165 | 54-55 | 1400 | 41 | 1060 | 65 | 1650 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13467 | 59-60 | 1500 | 34 | 880 | 67 | 1700 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14167 | 59-60 | 1500 | 41 | 1060 | 67 | 1700 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13473 | 61-63 | 1600 | 34 | 880 | 73 | 1867 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14173 | 61-63 | 1600 | 41 | 1060 | 73 | 1867 | 35 | 910 | 10 | 12 |
- - - -
Components and Advantages
?
- - - -
CZ-CMX/DM HE1W13431 conveyor belt splicing machine main components |
Name | Quantity | Remarks |
Heating Plate | 2 pieces | Heating Platen Size(L*W):880*1430mm |
Water Pressure plate | 1 piece | |
Heat insulation board | 2 pieces | On the insulation board piece, lower heat insulating plate with a water plate integration |
CZ-CMX temperature controller box | 1 set | CZ-CMX control box has the new structure, you can put circle the electrical lines on it, prevent the wires lost. |
Cross beams(mm) | 10 pieces | |
Clamp bolt,nut,gasket | 10 pieces | |
Ratchet wrench | 2 handles | |
Primary wire/cable with plugs | 1 piece | |
Secondary wire/cable with plugs | 2 pieces | |
CMX-8*20 Electrical Pump | 1 set | |
High pressure pipe | 1 piece | With the fast joint |
Rapid water cooling function | Yes | |
The clamping device | 1 set | |
Certificate, packing list (in English) | 1Copy | |
Vulcanizing machine manual (in English) | 1Copy | |
Belt vulcanizing machine bonding process of DVD(in English) | 1Copy | |
- - - -
?
?
FAQ
?
?
01) Q: Do you have any certificates for the vulcanizing machine?
A: We have CE Certificate and ISO9001:2008 for the machine.
02) Q: Normal delivery time?
A: About 15 working days. Customized machines will take a bit longer.
03) Q: Will you test the machine before shipping?
A: Yes, each machine, we will install and test before shipping.
04) Q: What after-sales service will you supply?
A: If the problems arising from the our manufacturing defects in the guarantee period, we will provide full
?
? ? support to?solve the problem, reducing the loss. At the same time, we will provide the free spare parts;
?
? ? Over the guarantee period,if you want to replace the accessory, we can give some discount on the ?
?
? ? price.
05) Q: Whether can visit your workshop to see how to manufacture the machine?
A: No problems, you are always welcomed to visit us.
06) Q:?Can I be your agent in our area?
A: Yes. ComiX is looking for the agents all over the world. If you are interested , please feel free to contact
?
? ? ?us to?negotiate the agency mattes in details.
?
07) Q:?How to get more informaition?
?
?A: Please visit www.comixvulcanizer.com or www.comixvulcanizing.com
?
Read More
Wuxi ComiX Vulcanization Technology Co.,Ltd.
Conveyor Belt Vulcanizing Equipment,Conveyor Belt Vulcanizing Press,Conveyor Belt Vulcanizer
Address: NO99. of Furong road, Xishan Economic Development Zone,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-83809086
Fax: 86-510-83783186
