Others

1. Home
2. Products
3. Electronic & Electrical
4. Others

Share us

Omnidirectional Indoor High Power Wifi Router Antenna For IEEE802.11 WLAN System

BGS-AN2400-13131B-L

Send Inquiry

Description

Omnidirectional?Indoor?High?Power?Wifi?Router?Antenna?For?IEEE802.11?WLAN?System

?

?

Detail Product Description

?

Frequency: 2400 ~ 2500 MHz

S.W.R: 2.0 MAX

Impedance:　50 ohm

Peak Gain: 3 dB

Connector: I-PEX MHF 20278-112R-13

?

Application:

?

1.Wi-Fi /WLAN /MEMO /Bluetooth System

2. Router

3. IEEE802.11 WLAN System

4. Wireless Communication System

?

Specification

?

?

- - - -
A. Electrical Characteristics |
Frequency | 2400 ~ 2500 MHz |
Impedance | 50 ohm |
S.W.R | 2.0 Max. |
Peak Gain | 3 dB |
Return Loss | >= 10 dB |
B. Material & Mechanical Characteristics |
Cable Type | RF 1.13 Cable |
Connector Type | ?I-PEX MHF 20278-112R-13 |
Body | ABS, Black |
C. Environmental | ? |
Operation Temperature | - 40 ?C ~ + 65 ?C |
Storage Temperature | - 40 ?C ~ +80?C |
? | ? | ? |
- - - -

?

Characteristics and Reliability Test

?

- - - -
Test Items | Test Condition and Procedure | Requirements |
C1 | S.W.R. | Set DUT on Network Analyzer; make individual calibration to test | Directive DUT specification |
M1 | Vibration | MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction | 1. No Visual Damage 2. Frequency Tol.<= 5% |
M2 | Random Drop | Height: 1.5 Meter; 3 directions; 1 time for each direction | 1. No parts separated 2. Frequency Tol.<= 5% |
M3 | Solderability | MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds | 1. Mounted on PCB 2. No Visual Damage |
M4 | Terminal- Pull Test | MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal | 1. Directive DUT specification 2. Frequency Tol.<= 5% |
M5 | Dimension | Inspection of dimension, color, material, package, surface process | Directive DUT specification |
E1 | Salt Spray | MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E2 | Humidity | MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E3 | Thermal Shock | 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E4 | Life (High Temp.) | MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
R1 | RoHS | With Reference to IEC 62321:2008 with flow chart | Directive RoHS 2002/95/EC |
R2 | PFOS | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
R3 | PFOA | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
- - - -

?

S Parameter Test Data

?



?

?

?

?

Read More