Machinery Designing & Processing
Description
Filling: 1. Pre-evacuation button: this button controls the bottle pre-evacuation work before beer filling.
2. Air-discharge button: this button controls the air discharge after beer filling finished.
3. When there is no bottle in the filling valve, there is button will not order the pre-evacuation button to evacuation. That is, this button control the process of “no bottle, no evacuation work” to keep the high evacuation rate when there is bottles in the filling valve.
4. Beer distributor: When the beer is filled into the bottle, beer will pass this distributor so that beer flows from the bottle inside wall to reduce foam.
Capping: Most advanced technology, seal the bottle excellently.
Fill cap as soon as the bottle is transmitted to the capping position.
Infrstrd ray inspect the cap avoid no caps.
Beer tank: Adopted the special device to keep well the stability of liquid level and CO2 pressure. In addition, in the small factory the open and close valves of this machine are mechanical control. But, our open and close valve are all controlled by cylinder(AIRTAC), which keep the work stable and make the machine work long life. Meanwhile, our machine has the high-pressure foaming device. You know, before capping, the filled bottle will run a distance opening the mouth. Once the bottle is finished fill, this foaming device will arouse the foam in the top of the beer in the bottle by the aseptic water to keep from germs into beer.
annagongda(at)sina.com
(86)159 5360 0732
Read More
Gongda Jixie Machine
malting production devices, beer(beverage)filling lines, diatomite filters, beer keg washing machines, beer keg (bottle)filling machines, draught beer machines, preservation barrel
Address: No 71 Gongyebei Road Licheng area,
Jinan, Shandong
China, 250000
Tel: 8653182378325
Fax: 8653182378325
