Electronic Signs
Description
Handheld Microscope Digital Eyepiece USB MC 500-W
?
?
A.????Specification
??????????????????????????
- - - -
Data Interface | Wire:USB2.0/UVC; |
Wireless Protocol | Wi-Fi :802.11bgn |
Thread Mouth | C- Mount |
Product resolution | 5.0Mega Pixels |
Sensor | 5.0Mega Pixels |
Pixel Size | 2.2um X 2.2um |
Frame rate |
@ 640X 480? | 30fps |
@ 2592X1944 | 15fps |
Auto White Balance | Yes |
SNR | 9811db |
Exposure?? | manual /auto |
Image | JPG/BMP.PNG/GIF/AVI |
Movie??? | yes |
Operating system supported? | windows 2003, win XP, Vista, win7(32bits&64bits) |
Dimension | tube size 23.2mm |
Software | Free Driver ,KoPa Capture Software |
- - - -
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
B. Description:
Its 802.11n AP board that achieves a data rate up to 150Mbps.It supports AP/Client modes. It is ideal for multi‐purpose installation to share wireless connection.
By supporting 64/128‐bits WEP, TKIP, WPA, WPA2, AES and WPS, helps to protect your data and privacy during transmission.
?
C.????Features:
Support boot from Flash；Data Rate up to 150Mbps
Security: 64/128‐bits WEP, TKIP, WPA, WPA2, AES, WPS; Multi‐modes: AP/Client
?
D . Brief buttons introduction
?
Introduction of three switches
【1】Battery indication
Displayed in green when fully charged, yellow when half charged, red when need charging battery. If the battery indicator turns off, please charge the battery in time.
?
【2】WiFi Working Indication
When it is in the WiFi working mode, WiFi Working Indication light displayed as flicking green, fast flicking rate imply good signal.
?
【3】Battery?Charging
Displayed in red when charging battery; displayed in green when fully charged.
?
【4】Charging Battery
If the Battery indicator displayed in green or no light, please charging the battery in time.
Interface of charging is Mini USB, you may charge the battery by plugging Mini USB cable into your computer or using adapter that suit for Mini USB interface.
It can works for about 100 minutes under WiFi wireless working mode after fully charged.
Note: Adapter‘s output voltage should be +5V, otherwise, it may damage the product.
?
【5】WiFi Wireless Working Mode
(Support IOS/iPhone/iPad /PC/Android Phone and Smart Phone that has WiFi function)
?
User quick start manual:
? ? ?1.????? Turn on the black button left and the wireless signal light indicator become green after about 20 seconds. Now it is under WiFi wireless working mode.
?
? ? 2.????? Click your phone or iPad Set up icon to start Wi-Fi device then choose the Wi-Fi signal name: for example : Wireless 11n AP( Factory default name).
?
?
? ?4.????? Following are the log in address that may appear on your iPhone/iPad/Android phone.
Wifi MicroScope #x (x) means number ; for example Wireless 11n AP(factory default name)
?
Note: software name Is_Cam is for iPad/iPhone, IP Cam Viewer lite is used in Android.
?
【6】Wired Working Mode(support Win7/Vista/XP/ Windows 2003)
?
1.????? Turn the button right then it is under the wired working mode.
2.????? You need insert the cable to the mini USB interface of product then connect to the computer.
3.????? You may view the image on ordinary PC by using DeskTop Video, Amcap, HiCap or our KoPa Capture software. KoPa capture software will bring more video and image processing functions.
It will be charged when under wired working mode, if you don’t use it to view the images, we suggest to shutdown it for faster battery charging .
?
Remark: When you stop viewing and don’t remove the inspection object for 5 minutes, it will show standby status to save the battery power. When you remove the object or click any function key of our KoPa Capture software, it will start to work normally.?
?
Note: Is-Cam software’s?proprietary?rights?belong to ABEL TECH.IP Came Viewer lite ‘s?proprietary?rights?belong to Robert Chou.
???
?
?
?
?
?
?
Read More
OSTEC OPTO-ELECTRONIC TECHNOLOGY CO.,LTD
Mobile Document Scanner
Address: A326-329 Third floor, Building A , Ming You Industrial Products Procurement Center,
Shenzhen, Guangdong
China, 518000
Tel: 86-755-86311060
Fax: 86-755-82507179
