Mining Machinery
Description
Instruction
1, for mine hydraulic shears used to cut off the ring chain Φ 26-42 mm circle chain metal materials.When used according to the ring chain size adjustment bolt diameter, placed in the chain ring chain at right angles to the head position.
2, when used to manually fill it up with 32 # anti-wear hydraulic oil pump, then put the hand pump fast connection with host cylinder, the oil drain screw tightening on the oil pump can work. Similarly, when the work after the completion of the oil drain screw loosening, working oil cylinder will automatically retraction.
3. Use the empty back several work schedule before, to be by flexible action, no oil leakage before use.
4. When used as a empty phenomenon, can relax first oil drain screw on the pump body, pump body vertical up head down to play a few times, then tighten the oil drain screw, can continue to use.
5. When a load, do not remove the quick joint, so as to avoid an accident and damaged parts
6. Check the oil quantity: if insufficient oil can& acute;t exert the performance of the machine.On such novel situations as part of the big bad action belongs to the oil amount is insufficient.
7. Use in cylinder is 32 # anti-wear hydraulic oil or 10 # transformer oil.Refueling can unload oil pump at the end of the rubber bumpers, then spin off road 8 mm socket head cap screw flow-line can go, but come on slowly, and to shake the handle to make its exhaust, tubing will no longer be bubbled to fill.
8. After cutting, tool post between the blades are not allowed to leave first.Otherwise move blocked the body damage of the cutting tools.
9. Less fat harder than steel must calculate the maximum cutting force, and pay attention to the short head fly out of hurt, completes the safety measures.
Read More
Shandong eight mining machinery co., LTD
z123456
Address: Jining city in shandong province, 30 Jin Yu road,
jining, shandong
China, drtr
Tel: 0086-0537-2280165
Fax: 0086-0537-2280165
