Company

Low voltage twisted ABC Cable are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. They can improves safety and reliance of electrified wire netting.,

,

ACSR conductor consists of a solid or stranded steel core surrounded by strands of aluminium. ACSR conductor is available in a range of steel strengths varying from 6% up to 40%. The higher strength ACSR conductors are used for river crossings, overhead earth wires, and installations involving extra long spans. Against any given resistance of conductor, ACSR conductor may be manufactured to have different tensile strengths as per requirement. The principal advantage of these conductors are their high tensile strength and light weight, covering longer spans with less supports. Due to the greater diameter of an ACSR conductor much higher corona limit can be obtained, giving a big advantage on high and extra high voltage overhead lines.,

All Aluminium Conductors are manufactured from electrolytically refined aluminium. They have a high level of purity; the minimum accepted level of aluminium is 99.7%. This product is also known as aluminium stranded conductor, as it is constructed of one or more strands of aluminium wire depending on the intended usage. As a consequence of this high level of purity, AAC Conductors are mainly used in areas where spacing is short and supports are close.,

AAAC Bare Conductor or All Aluminium Alloy Conductor, is used as a bare overhead conductor for power transmission and distribution lines. AAAC conductor are made out from aluminum-magnesium-silicon alloy of high electrical conductivity (min 53% IACS) containing magnesium (0.6-0.9%) & silicon (0.5-0.9%) to give it better mechanical properties after treatment. AAAC conductors are made out of aluminum alloy 6201. AAAC conductor has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR conductor on equal diameter basis,